+86 573 8559 9073 info@aokux.com
Copyright © Aokux, aviation obstruction light, Marine Lantern, Low Intensity Lights, Medium Intensity Lights, Helipad Lights, solar obstruction light, Exporter, Factory China
Home » Products » Helicopter Approach Path Indicator AO-HP-HAPI
Helicopter Approach Path Indicator AO-HP-HAPI

Helicopter Approach Path Indicator AO-HP-HAPI

* Name:
Tel:
* E-mail:
* Message:
  • feature
Model AO-HP-HAPI,The Helicopter Approach Path Indicator - HAPI system consists of a single lighting to provide a visual indication of the correct approaching path of the helicopter.
The HAPI uses patented, LED-based optics to achieve the lowest power consumption, highest intensity and sharpest green/red transition. 

Compliance:
1. ICAO Annex 14 Volume II –Figure 5-11 
2. FAA AC 150/5390-2B Heliport Design Guide
3. CAP 437

Features:
1. The HAPI System has a module with lights which has a lens system that divides the light into 4 separate segments:
     1). Flashing Green Light = Helicopter above the optimal approach slope (too high).
     2). Fix Green Light = Helicopter on the slope.
     3). Fix Red Light = Helicopter slightly below the optimal slope (slightly too low).
     4). Flashing Red Light = Helicopter below the optimal slope (too low).

2. Depending on the viewing angle of the pilot in relation to this system, he sees either the Flashing green or the Fix green or the Fix red or the Flashing Red light.
The signal repetition rate of the flashing sectors must be greater than 2 Hz. In accordance with ICAO, the HAPI is capable of adjustment in elevation at any desired angle between 1 and 12 degrees above the horizontal with an accuracy of +/- 5 minutes of arc. The HAPI System will switch off atomically when the vertical misalignment of a unit exceeds ±0.5 degrees (±30 minutes).

Specification:

Model NO.: AO-HP-HAPI
Light Source high intensity LED
Available Colors
Red/Green
working mode
Steady burning + Flashing 
Photometry
Compliant with ICAO Annex 14 volume II intensity 9000cd
Operation Mode
24 hours operation
LED Life Experience(hours)
>100,000
Operating Voltage
AC220V, AC120V, DC48V
Power(W)
50W
Body Material
Stainless steel
Mounting
140xM10
Dimension(mm)
455x520x184
Weight(kg)
10KG
Product Life
5 years Plus
Ambient Temperature(℃)
-55~+70
Humidity
0%-100%
Wind Speed
80m/s
IP grade IP65
Options Available
Power coated color
VHF Pilot to Ground Remote Control
NVG-compatible infrared (IR) LEDs
Solar powered


Dimension(MM):                                                                                               

Application:
Helipad/Heliport/Helideck
Permanent and temporary helipads 
Emergency and hospital helipads 
Remote helipads 
Military & NVG operations

* Name:
Tel:
* E-mail:
* Message: