Model AO-SLI-S1 is a self-contained obstruction light which consist of solar panel, battery and lamp. There is no need for external power input. The vertical degree of the solar panel is adjustable to ensure it could get the most sunlight in different area.
It is designed for marking top of obstacle that do not exceed 45 meters in height.
Compliance:
1. ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6-1, 6-2 Low Intensity Type A / B /E Obstruction Light.
2. FAA L-810.
Features:
1. 3 high power CREE LED, as light source, life experience >100,000 hours, make sure LED keep bright while use.
2. With bird needle to prevent bird drop.
3. UV & vibrations protected polycarbonate lens for converging light.
4. Powder coated die casting aluminum base, light fastness, resist snow and rain.
5. Battery box made of corrosion resistant 304 stainless steel.
6. Self-contained without external power supply, Cable cost saving & cabling job saving, No wiring job, nice & easy installation.
7. Solar panel vertical degree is adjustable.
8. Solar panel as sensor(Photocell) for day & night working mode(dusk to dawn mode).
9. ON/OFF button under base make local control easy.
10. Steady/Flashing(20fpm) adjustable switch available.
Specification:
Dimension: Installation:
Application:
1. solar low-intensity light is specialized used on the top of the High Chimney, Telecommunication tower, Wind Turbine where there is no cable power supply and those facilities which have high requirements on lightning protection.
2. Used alone on the top of obstacle which height is less than 45m.
It is designed for marking top of obstacle that do not exceed 45 meters in height.
Compliance:
1. ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6-1, 6-2 Low Intensity Type A / B /E Obstruction Light.
2. FAA L-810.
Features:
1. 3 high power CREE LED, as light source, life experience >100,000 hours, make sure LED keep bright while use.
2. With bird needle to prevent bird drop.
3. UV & vibrations protected polycarbonate lens for converging light.
4. Powder coated die casting aluminum base, light fastness, resist snow and rain.
5. Battery box made of corrosion resistant 304 stainless steel.
6. Self-contained without external power supply, Cable cost saving & cabling job saving, No wiring job, nice & easy installation.
7. Solar panel vertical degree is adjustable.
8. Solar panel as sensor(Photocell) for day & night working mode(dusk to dawn mode).
9. ON/OFF button under base make local control easy.
10. Steady/Flashing(20fpm) adjustable switch available.
Specification:
| Model NO.: | AO-SLI-S1 |
| Light Source | LED |
|
Available Colors |
Red(Other color is optional) |
|
Light Intensity(cd) |
>32.5cd |
|
Horizontal Output(degrees) |
360 |
|
Vertical Divergence(degrees) |
≥10 |
|
Flash Characteristics |
Steady/Flashing(20fpm) adjustable |
|
Operation Mode |
Dusk-to-Dawn operation |
|
LED Life Experience(hours) |
>100,000 |
|
Operating Voltage |
12V DC |
|
Power(W) |
12W |
|
Circuit Protection |
Integrated |
|
Solar Module Type |
Mono crystalline Silicon |
|
Charging Regulation |
Microprocessor controlled |
|
Battery type |
Lithium ion battery |
|
Nominal Voltage (V) |
12V |
|
Battery Service Life |
Average 3 years |
|
Battery Capacity(AH) |
9 |
|
Autonomy (hours) |
Steady: 90hrs, Flashing: 180hrs |
|
Lamb Body Material |
Powder coated stainless steel 304 |
|
Base Material |
Stainless steel 304 |
| Installation Size | 3/4inch thread |
|
Overall Size (mm) |
268×243×300 |
|
Product Life Expectancy |
Average 5 years |
|
Weight(kg) |
3KG |
|
Ambient Temperature(℃) |
-55~70 |
|
Humidity |
0~90% |
|
Wind Speed |
80m/s |
|
Waterproof |
IP65 |
Dimension: Installation:
Application:
1. solar low-intensity light is specialized used on the top of the High Chimney, Telecommunication tower, Wind Turbine where there is no cable power supply and those facilities which have high requirements on lightning protection.
2. Used alone on the top of obstacle which height is less than 45m.
