Compliance:
1. ICAO Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition July 2016.
2. FAA L-810 Steady-burning Red Aviation Obstruction Light.
Features:
1. LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light.
2. Power supply available in 110-240V AC.
3. Bird deterrent spike on top.
4. Unique designed polycarbonate lens for converging light and also provides corrosion resistance and UV protection.
5. UV protection Powder coated bright yellow color base make better visibility.
6. Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection.
7. Built-in photocell for day/night operation.
8. Steady/Flashing(20 flashes per minute) DIP switch on PCB.
9. Surge and lightning protection.
Specification:
Model NO.: | AO-LI-S2 |
Light Source | LED |
Available Colors |
Red(Other color is optional) |
Light Intensity(cd) |
>32.5cd, others optional |
Horizontal Output(degrees) |
360 |
Vertical Divergence(degrees) |
≥10 |
Flash Characteristics |
steady-burning/flashing 20-60times/min |
Operation Mode |
work in the night (Built-in photocell for day/night operation,night on, and daytime off) |
LED Life Experience(hours) |
>100,000 |
Operating Voltage |
110V-265V AC |
Power Consumption(W) |
<5W |
Circuit Protection |
Integrated |
Body Material |
Polycarbonate |
Base Material |
Die-casting aluminum |
Mounting |
Bracket |
Weight(kg) |
1.8KG |
Product Life |
5 years Plus |
Ambient Temperature(℃) |
-40℃~+70℃ |
Humidity |
10%-95% |
Wind Speed |
120m/s |
IP grade | IP65 |
Light controlled sensitivity |
100Lux |
Dimension:
Application:
1. AO-LI-S2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m.
2. When obstacle object is higher than 45m, AO-LI-S2 can be used with Medium-intensity or high-intensity obstruction light to indicate hazardous obstructions with a steady red safety light.
Usage notice :
1.Check whether the supply voltage does comply with the rated voltage of device.
2.Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3.After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
4.Non-professional workers cannot do the device maintenance, in order not to expand the error and be hurt.
5. Pls do not let any direct light source to photocell switch in the night.