Model AO-SLI-T2 is a LED Low-intensity Double Solar Aviation Obstruction light is adopting insert high efficient solar panels integrated design, cooperate with solar dedicated lithium ion battery as power supply. There are two lamps on two arms, one is main lamp, another is standby. When main lamp fail, standby light turn on automatically. 3/4inch thread hole under base is very suitable for pole mounting.
Compliance:
1. Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition July 2016, table 6.3 Low-intensity Type A/B/E Obstacle Light
2. FAA L-810.
Features:
1. LED as light source, life experience >100,000 hours.
2. With bird needle to prevent bird drop.
3. UV & vibrations protected polycarbonate lens for converging light.
4. Stainless steel 304 base, light fastness, resist snow and rain.
5. Battery box made of corrosion resistant 304 stainless steel.
6. Mono crystalline silicon solar panel, conversion efficiency is better than poly crystalline silicon.
7. Solar panel angel is adjustable (Vertical 15-90°).
8. Solar panel as photocell (Photo diode) for day & night working mode (dusk to dawn mode).
9. ON/OFF button under base make local control easy.
10. Flashing(20fpm)/steady toggle switch under base.
11.Main-standby mode
Specification:
Dimension(mm):
Application:
1. AO-SLI-T2 solar low-intensity light is specialized used on the top of the High Chimney, Telecommunication tower, Wind Turbine where there is no cable power supply and those facilities which have high requirements on lightning protection.
2. Used alone on the top of obstacle which height is less than 45m.
Compliance:
1. Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition July 2016, table 6.3 Low-intensity Type A/B/E Obstacle Light
2. FAA L-810.
Features:
1. LED as light source, life experience >100,000 hours.
2. With bird needle to prevent bird drop.
3. UV & vibrations protected polycarbonate lens for converging light.
4. Stainless steel 304 base, light fastness, resist snow and rain.
5. Battery box made of corrosion resistant 304 stainless steel.
6. Mono crystalline silicon solar panel, conversion efficiency is better than poly crystalline silicon.
7. Solar panel angel is adjustable (Vertical 15-90°).
8. Solar panel as photocell (Photo diode) for day & night working mode (dusk to dawn mode).
9. ON/OFF button under base make local control easy.
10. Flashing(20fpm)/steady toggle switch under base.
11.Main-standby mode
Specification:
| Model NO.: | AO-SLI-T2 |
| Light Source | LED |
|
Available Colors |
Red |
|
Light Intensity(cd) |
>32.5cd |
|
Horizontal Output(degrees) |
360 |
|
Vertical Divergence(degrees) |
10 |
|
Flash Characteristics |
Steady/Flashing(20fpm) adjustable |
|
Solar Panel |
Mono crystalline silicon solar panel |
|
Battery capacity: |
Lithium iron phosphate battery |
| Battery capacity | 3.7V |
|
Solar Panel Power(W) |
3.6W |
|
Circuit Protection |
Integrated |
|
Charging Regulation |
Microprocessor controlled |
|
Battery Service Life |
>5 years |
| Working Model |
Flashing/steady burning |
|
Lamb Body Material |
UV protected Polycarbonate |
|
Base Material |
Powder-coated Die-casting aluminum |
| Installation Size | 3/4",Pitch circle 100mm 4 M12 holes are distributed |
|
Overall Size (mm) |
330mm×220mx162mm |
|
Product Life Expectancy |
Average 5 years |
|
Weight(kg) |
3KG |
|
Ambient Temperature(℃) |
-55~70 |
|
Autonomy (hours) |
Steady: 30, Flashing: 70 |
|
Wind Speed |
80m/s |
|
Waterproof |
IP67 |
Dimension(mm):
Application:
1. AO-SLI-T2 solar low-intensity light is specialized used on the top of the High Chimney, Telecommunication tower, Wind Turbine where there is no cable power supply and those facilities which have high requirements on lightning protection.
2. Used alone on the top of obstacle which height is less than 45m.
